Running a service on all hosts in a group_Nagios Core Administrators Cookbook-QQ阅读中文历史网

上QQ阅读APP看书，第一时间看更新

Running a service on all hosts in a group

In this recipe, we'll create a new service, but instead of applying it to an existing host, we'll apply it to an existing hostgroup. In this case, we'll create a group called webservers. The steps for this are very similar to adding a service for just one host; only one directive is different.

Getting ready

You should have a working Nagios Core 3.0 or better server running, with a web interface. You should be familiar with adding services to individual hosts.

You should also have at least one hostgroup defined, with at least one host in it; we'll use a group called webservers, with the hosts sparta.naginet and athens.naginet defined in it.

For reference, here is the hostgroup definition and the definitions for the two hosts in it:

define hostgroup {
    hostgroup_name  webservers
    alias           Webservers
}
define host {
    use         linux-server
    host_name   athens.naginet
    alias       athens
    address     10.128.0.22
    hostgroups  webservers
}
define host {
    use         linux-server
    host_name   sparta.naginet
    alias       sparta
    address     10.128.0.21
    hostgroups  webservers
}

How to do it...

We can create the service definition for the webservers group as follows:

Change to the directory containing the file in which the webservers hostgroup is defined, and edit it:
```
# cd /usr/local/nagios/etc/objects
# vi hostgroups.cfg
```

Add the following code snippet just after the hostgroup definition. Change the lines in bold to suit your own template and hostgroup names:

define service {
 use generic-service
 hostgroup_name webservers
    service_description    HTTP
    check_command          check_http
}

Restart the Nagios Core server:
```
# /etc/init.d/nagios restart
```

It's important to note that if we are already monitoring those hosts with a per-host service of the same name, then we will need to remove those definitions as well; Nagios Core may not start if a service of the same description is already defined on the same host.

How it works...

Adding a service to a hostgroup works in exactly the same way as adding it to an individual host, except that it only requires one definition, which is then individually applied to all the hosts in the group. This means it's a very good way to keep a Nagios Core configuration tidier. If we have a group of 50 different web servers in it and we need to monitor their HTTP services on the same basis for each one of them, then we don't need to create 50 service definitions; we can just create one for their hostgroup, which amounts to a smaller and more easily updated configuration.

There's more...

Like the host_name directive for services, the hostgroup_name directive can actually have several hostgroups defined, separated by commas. This means that we can apply the same service to not just one group, but several. For services that we would want to run on several different groups (for example, basic PING monitoring) this can amount to a much more flexible configuration.